Need help with Peakhold?
For questions, bug reports, feedback, or feature requests, contact:
Peakhold is an audio measurement toolbox for iPhone, iPad, and Mac. Use it to measure sound level, view the spectrum with the FFT and RTA analyzers, check loudness, generate test signals, record, analyze audio files, and set up speakers and rooms. It also includes Home Screen widgets and three Audio Unit plug-ins: Peakhold: Analyzer, Peakhold: Reference, and Peakhold: Test Signal.
A phone’s microphone is not a certified sound level meter. For legal or health-and-safety measurements, use a Class 1 or Class 2 meter.
To measure sound, allow Peakhold to access your microphone when prompted. If access was previously denied, you can enable it in your device’s privacy settings, and Peakhold will pick it up when you return to the app.
If a reading looks wrong, check which microphone and input channel are selected, and that the intended input is connected when you use an audio interface. Calibrating your microphone makes readings more accurate.
Audio stops in the background unless the generator, a recording, or the noise dose is running. If another app, a phone call, or Siri interrupts Peakhold, or you connect or disconnect headphones, return to the app and start the tool again. Output Latency and similar tests need a working output and the microphone.
Room Scan uses the camera, and the LiDAR scanner where your device has one. Allow camera access in your device’s privacy settings if it does not start.
Pick files with the file picker. File Analyzer reads WAV, AIFF, MP3, AAC, ALAC, and FLAC files. Long analyses run one at a time, and Peakhold can notify you when one finishes while the app is in the background. If you did not get a notification, check that notifications are allowed for Peakhold.
Widgets show the latest values Peakhold measured and cannot use the microphone themselves. If a widget looks empty or out of date, open Peakhold and take a measurement, then check the widget again.
Peakhold: Analyzer, Peakhold: Reference, and Peakhold: Test Signal are Audio Unit (AUv3) plug-ins. If one is missing in your host app, open Peakhold once, then restart the host and rescan its plug-ins. Peakhold: Reference compares a track on its main input with a reference on its sidechain input, which some hosts need set up before the plug-in sees it.
Recordings are saved as files on your device and appear in the Files app on iPhone and iPad. Results and PDF reports are in the app’s Library, and a report leaves the app only when you share it.
When reporting a problem, please include your device model, operating system version, Peakhold version, and a brief description of the steps that caused the issue.
If relevant, also include the tool you were using, the microphone or audio interface and output you were using, and the host app and plug-in name if the issue is in a plug-in.
You can view the Peakhold Privacy Policy here:
Privacy Policy